Full description
Basic parameters
Chassis Specifications of Vehicle
Vehicle Brand | Foton | ||
Vehicle Series | Aumark | ||
Vehicle Model | BJ1069VCJEA-D | ||
Country of Manufacture | China | ||
Driving Type | 4×2 | ||
Persons in Cab | 2+1 | ||
Whole Vehicle Main Parameters | Overall Dimensions (LxWxH) (mm) | 6725×2100×2280 | |
Wheel Base (mm) | 3800 | ||
Wheel Track (front/rear) (mm) | 1685/1615 | ||
Min. Ground Clearance (mm) | ≥180 | ||
Weight Data | Curb Weight (kg) | 3500 | |
Rated Payload (kg) | 5000 | ||
Gross Vehicle Weight (kg) | 8695 | ||
Whole Vehicle Main Performance | Max. Speed (km/h) | 95 | |
Max slope of climb (%) | ≥20 | ||
Fuel Consumption (L/100km) | 15 | ||
Min Turning Diameter (m) | 18 | ||
Engine | Model | YZ4105ZLQ | |
Type | Four-cylinder, In-line, DI, Diesel | ||
Displacement (L) | 4,087 | ||
Rated Power (kw/rpm) | 90/2800 | ||
Max. Torque | 380/1600 | ||
Gear Box | Model | 6T46 | |
Speed Ratio | i1:6.314, i2:3.913, i3:2.262, i4:1.393, i5:1.000, i6:0.788, iR:5.874 | ||
Clutch | Type | Ф330×Ф 200 Diaphragm spring clutch | |
Rear Axle | Type/Main reducer ratio | Whole banjo type,Rate:4.875 | |
Suspension | Front suspension/Leaf spring number | Non-independent, 9 | |
Rear suspension/Leaf spring number | Non-independent, 11+7 | ||
Steering Wheel | Circular ball, Power steering | ||
Brake System | Service brake | Pneumatic drum brake, Ф310×100/130 (Front/Rear) | |
Parking brake | Air cut brake | ||
Auxiliary brake | Exhaust brake | ||
Wheels and tire | 6+1/8.25-16 | ||
Electronic Device | Rated voltage | 24V | |
Battery | 2X100Ah | ||
Fuel Tank (L) | 120 | ||
Basic Equipment | Adjustable steering wheel, сlutch booster, Heater, power steering. | ||
1069VCJEA-0DZA05 | Basic equipment | ||
Technical Specifications of Garbage Collector
Brand | KARBA | ||
Country of Manufacture | Turkey | ||
Garbage Body | Body Volume (m3) | 7m3 | |
Body Material | Body Base: 4mm St.52 | ||
Body Side Walls: 3mm St.52 | |||
Body Ceilling: 2mm St.52 | |||
Sub-frame: 8мм St.52 | |||
Rear Hopper | There will be a specially formed rubber sealing element between the hopper and the garbage body | ||
Compaction Rate | 1:03 | ||
Hopper Capacity(m3) | 1m3 | ||
Hopper Base | 5mm St.52 | ||
Hopper Side Walls | 3mm St.52 | ||
Press Panel | 4mm St.52 | ||
Waste Water Tanks | 2 units waste water collecton tanks; one under the hopper and one under the body on the front side of the vehicle | ||
Tailgate Lifting Mechanism | Tailgate will be lifted by assist of hydraulic cylinders | ||
Container Lifting | 2 pieces 120 lt or one piece 240 lt plastic containers, Euro Type 1,100 lt capacity | ||
Operation and Control | Garbage compactor will have Manual operation for opening/closing and compaction | ||
Hydraulic System | PTO | Suitable PTO will be installed. PTO will be engaged from the driver’s Cabin | |
Hydraulic Pump | Suitable hudraulic oil pump will be installed. (Italian Origin) | ||
Hydraulic Cylinders | Double Acting hydraulic cylinders will be used. (Turkish origin) | ||
Working Pressure (Bar) | Max. 170 ± 10 Bar | ||
Hydraulic Pump Capacity | Min.81 cc capacity | ||
Oil Tank | 90 lt capacity oil tank equipped. The hydraulic tank will have a return filter, suction filter, tank cap, drainage cap, 1,5” spherical valve and level indicator | ||
Paint | Based on the consumers’ demand | ||
Accessories | • 1 unit rotating beacon back of the equipment • 1 unit working light at the rear • 2 units handling bar and steps covered by anti-skidding material for operators • Two plastic mudguards with rubber flaps at the rear |