Full description
Basic parameters
Vehicle Brand | Foton | ||
Vehicle Series | Aumark | ||
Vehicle Model | BJ1069VCJEA-D | ||
Country of Manufacture | China | ||
Driving Type | 4×2 | ||
Persons in Cab | 2+1 | ||
Whole Vehicle Main Parameters | Overall Dimensions (LxWxH) (mm) | 6725×2100×2280 | |
Wheel Base (mm) | 3800 | ||
Wheel Track (front/rear) (mm) | 1685/1615 | ||
Min. Ground Clearance (mm) | ≥180 | ||
Weight Data | Curb Weight (kg) | 3500 | |
Rated Payload (kg) | 5000 | ||
Gross Vehicle Weight (kg) | 8695 | ||
Whole Vehicle Main Performance | Max. Speed (km/h) | 95 | |
Max slope of climb (%) | ≥20 | ||
Fuel Consumption (L/100km) | 15 | ||
Min Turning Diameter (m) | 18 | ||
Engine | Model | YZ4105ZLQ | |
Type | Four-cylinder, In-line, DI, Diesel | ||
Displacement (L) | 4,087 | ||
Rated Power (kw/rpm) | 90/2800 | ||
Max. Torque | 380/1600 | ||
Gear Box | Model | 6T46 | |
Speed Ratio | i1:6.314, i2:3.913, i3:2.262, i4:1.393, i5:1.000, i6:0.788, iR:5.874 | ||
Clutch | Type | Ф330×Ф 200 Diaphragm spring clutch | |
Rear Axle | Type/Main reducer ratio | Whole banjo type,Rate:4.875 | |
Suspension | Front suspension/Leaf spring number | Non-independent, 9 | |
Rear suspension/Leaf spring number | Non-independent, 11+7 | ||
Steering Wheel | Circular ball, Power steering | ||
Brake System | Service brake | Pneumatic drum brake, Ф310×100/130 (Front/Rear) | |
Parking brake | Air cut brake | ||
Auxiliary brake | Exhaust brake | ||
Wheels and tire | 6+1/8.25-16 | ||
Electronic Device | Rated voltage | 24V | |
Battery | 2X100Ah | ||
Fuel Tank (L) | 120 | ||
Basic Equipment | Adjustable steering wheel, сlutch booster, Heater, power steering. | ||
1069VCJEA-0DZA05 | Basic equipment | ||
Sewer Vacuum equipment Specifications
Brand | KARBA | |
Country of Manufacture | Turkey | |
Tank | Tank Volume | 3,000 lt. +/- 3 % |
Tank Material and Shape | 5 mm, St. 52 Carbon Steel, Cylindrical | |
Baffle plate | Min. 2 units in tank | |
Overflow | Overflow pipe on clean water tank | |
Tank-Chassis Connection | The tank will be connected to the vehicle’s chassis with an auxiliary chassis. The auxiliary chassis will be made of 8 mm St-52 steel material. |
|
Tank Discharging | Tank is fixed on the chassis with 3% slope for easy discharging | |
Suction Valve for Waste Water | Manual Controlled, 4 inch ball type suction valve | |
Discharge Valve for Waste Water | Manual Controlled, 4 inch ball type discharge valve | |
Level Gauges | At least 3 units of dish shaped level gauges | |
Rear Lid | Rear Lid Material | 5 mm St. 52 Carbon Steel |
Rear Lid Opening | Hinged from the upper side of the tank. Hydraulic vertical opening. | |
Rear Lid Lock | 4 units of manual locks. | |
Vacuum Pump | Make | Battioni Pagani |
Model | MEC 6,500 | |
Air Flow | 7000 I/min | |
Driven | PTO | |
Power Required at Max. Vacuum | 24 KW | |
Maximum Vacuum | 94% | |
Safety | 1st Level Suction Safety | On the top of the tank, safety ball made of stainless steel material. |
2nd Level Suction Safety | Safety ball, located on vacuum line between vacuum pump and first safety system. | |
Relief Valves | Will be used where necessary | |
System Safety | Control panel has an emergency stop buttons. Once it is activated, the equipment can be restarted from the driver’s cabin only. |
|
Controls | PTO | Engaged from the driver Cab |
Main Board | Control panel will be located at the rear right side of the tank. Electrical wires are connected with sockets to each other and to the panel. |
|
Main Board Controls and Indicators |
• Hydraulic system monometer • Vacuum meter • Vacuum pump on/off • Vacuum pump work meter • Work lights control • Vehicle engine gas control • Vehicle engine RPM counter |
|
Accessories | • 1 Unit climbing ladder mounted on the body • 2 units discharge hoses 3 m x 4” with couplings • 2 units suction hoses 3 m x 4” with couplings • Lockers on both sides of the body, for storage of equipment and attachments • Spanner and keys • Mudguards on rear wheels |
|
Paint | Inside Tank and Outer Surface | Inside tanks epoxy primer coating against corrosion, outside of all paintable surfaces painted to orange color following to epoxy primer coating, aluminum surfaces will stay neutral. |
Electricals / Illumination | • All electrical installation will be done according to EN regulations • Electrical cables are insulated • 1 unit of amber color rotating lights mounted on top of driver’s cabin and rear of the vehicle. • 1 unit of work light, 100 W, mounted on the rear lid for night |