Full description
Basic parameters
| Vehicle Brand | FOTON | |||
| Vehicle Series | AUMARK | |||
| Car Model | BJ1043V8JE6-D | |||
| Country of Manufacture | China | |||
| Driving Type (Wheel Formula) | 4×2 | |||
| Persons in cabin | 2+1 | |||
| Whole Vehicle main parameters | Overall Dimensions (LxWxH) mm | 5875×1915×2230 | ||
| Wheelbase(mm) | 3360 | |||
| Wheel Track (front/rear) (mm) | 1530/1485 | |||
| Min. ground clearance (mm) | ≥180 | |||
| Weight | Curb weight (kg) | 2700 | ||
| Rated Payload(kg) | 3000 | |||
| Gross vehicle weight kg | 5895 | |||
| Basic Performance of the Vehicle | Max speed(km/h) | 95 | ||
| Maximum Slope to Climb (%) | ≥20 | |||
| Fuel Consumption(L/100km) | 13 | |||
| Minimum turn Diameter | 15 | |||
| Engine | Model | YZ4102ZLQ | ||
| Type | Four cylinder, in-line, with water cooling, DI, turbocharging | |||
| Volume L | 3 | |||
| Normal Power(kw/rpm) | 81/2900 | |||
| Max Torque (N. m /rpm) | 310/1800 | |||
| Gear Box | Model | 5T30 | ||
| Speed Ratio |
i1:4.766,i2:2.496,i3:1.429, i4:1.000,i5:0.728,iR:4.744 |
|||
| Rear Axle | Type/ Main Gear Box Proportions | Whole banjo type,Speed ratio 5.375 | ||
| Suspension | Front Suspension/Bow Spring Number | Longitudinal, half-elliptical leaf spring,non-independent suspension, 3+1 | ||
| Rear Suspension/Bow Spring Number | Longitudinal, half-elliptical leaf spring,non-independent suspension,main and auxiliary leafspring, hydraulic dual acting shock absorbe,6+7 | |||
| Steering Mechanism | Type | Hydraulic Steering | ||
| Brakeing System | Main brake and Repeated Type | Dual circuits pneumatic drum brake | ||
| Parking Brakes | Central drum brake | |||
| Brake Assist | Exhaust brake | |||
| Tires quantity/Tire Sizes | 6+1/6.50-16 | |||
| Electric Devices | Voltage | 24V | ||
| Battery | 2X100Ah | |||
| Fuel Tank(L) | 80L | |||
| Main Devices | Heater, Heat Power Control, SteeringPower, Clutch Power， | |||
| 1043V8JEA-0SZA06 | Basic Equipment | |||
Sewer Vacuum equipment Specifications
| Brand | KARBA | |
| Country of Manufacture | Turkey | |
| Tank | Tank Volume | 1800 L. +/- 3% |
| Tank Material and Shape | 4 mm, St. 52 Carbon Steel, Cylindrical | |
| Baffle plate | Min. 1 unit in tank | |
| Overflow | Overflow pipe on clean water tank | |
| Tank-Chassis Connection | The tank will be connected to the vehicle’s chassis with an auxiliary chassis. The auxiliary chassis will be made of 8 mm St-52 steel material. |
|
| Tank Discharging | Tank is fixed on the chassis with 3% slope for easy discharging | |
| Suction Valve for Waste Water | Manual Controlled, 4 inch ball type suction valve | |
| Discharge Valve for Waste Water | Manual Controlled, 4 inch ball type discharge valve | |
| Level Gauges | At least 3 units of dish shaped level gauges | |
| Rear Lid | Rear Lid Material | 4 mm St. 52 Carbon Steel |
| Rear Lid Opening | Hinged from the upper side of the tank. Hydraulic vertical opening. | |
| Rear Lid Lock | 4 units of manual locks. | |
| Vacuum Pump | Make | Battioni Pagani |
| Model | MEC 6,500 | |
| Air Flow | 7000 I/min | |
| Driven | PTO | |
| Power Required at Max. Vacuum | 24 KW | |
| Maximum Vacuum | 94% | |
| Safety | 1st Level Suction Safety | On the top of the tank, safety ball made of stainless steel material. |
| 2nd Level Suction Safety | Safety ball, located on vacuum line between vacuum pump and first safety system. | |
| Relief Valves | Will be used where necessary | |
| System Safety | Control panel has an emergency stop buttons. Once it is activated, the equipment can be restarted from the driver’s cabin only. |
|
| Controls | PTO | Engaged from the driver Cab |
| Main Board | Control panel will be located at the rear right side of the tank. Electrical wires are connected with sockets to each other and to the panel. |
|
| Main Board Controls and Indicators |
• Hydraulic system monometer • Vacuum meter • Vacuum pump on/off • Vacuum pump work meter • Work lights control • Vehicle engine gas control • Vehicle engine RPM counter |
|
| Accessories | • 1 Unit climbing ladder mounted on the body • 2 units discharge hoses 3 m x 4” with couplings • 2 units suction hoses 3 m x 4” with couplings • Lockers on both sides of the body, for storage of equipment and attachments • Spanner and keys • Mudguards on rear wheels |
|
| Paint | Inside Tank | Inside tanks epoxy primer coating against corrosion, outside of all paintable surfaces painted to orange color following to epoxy primer coating, aluminum surfaces will stay neutral. |
| Electricals / Illumination | • All electrical installation will be done according to EN regulations • Electrical cables are insulated • 1 unit of amber color rotating lights mounted on top of driver’s cabin and rear of the vehicle. • 1 unit of work light, 100 W, mounted on the rear lid for night |
|
